Click image to view full size image
2" John Morris Fire Hose Coupling for Fire Fighting System
Brief Description
A hose coupling is a connector on the end of a hose to connect or couple it with another hose orwith a tap or a hose appliance, such as an irrigation sprinkler. It is usually madeof steel, brass, stainless steel, aluminium or plastic. Used for combining water band with waterband ,fire hydrant ,water lance and the fire-fighting truck so that they are to supply water orfoam misture for putting out fire.
Our main production line for hose coupling is KD,KN,KY,KWA,KWS ect for fire hose coulping through electrophoretic technique,so that our product can be anti-corrosion.
Technical Specification
| Fire Hose Coupling Type | Inlet | Outlet |
| British/John Morris Coupling |
2.5"BS336 | Φ63.5 |
| 2"BS336 | Φ51 | |
| 1.5"BS336 | Φ38 | |
| 2.5"BS336 | Φ51 | |
| 2.5"BS336 | Φ38 | |
| 2"BS336 | Φ38 |
| Fire Hose Coupling Type | Inlet | Outlet |
| American(ANSI Pin)Fire Hose Coupling |
2.5"NH | Φ63.5 |
| 2"NH | Φ51 | |
| 1.5"NH | Φ38 |
| Fire Hose Coupling Type | Inlet | Outlet |
| Nakajima(Machino) fire hose coupling |
2.5" | Φ63.5 |
| 2" | Φ51 | |
| 1.5" | Φ38 |
| Fire Hose Coupling Type | Inlet | Outlet |
| Forestry Fire Hose Coupling |
1.5" | Φ38 |
| 1.5" | 1.5" BSP | |
| 1.5" | 1.5" NPSH | |
| 1.5" | F1.5" BSP |
| Fire Hose Coupling Type | Inlet | Outlet |
| Gost(Russian) Fire Hose Coupling |
2" | Φ50 |
| 2.5" | Φ70 | |
| 3" | Φ80 | |
| 4" | Φ100 |
| Fire Hose Coupling Type | Inlet | Outlet |
| UNI Fire Hose Coupling | UNI70 | Φ70 |
| UNI45 | Φ45 |
| Fire Hose Coupling Type | Inlet | Outlet |
| Storz Fire Hose Coupling |
4" STORZ | Φ100 |
| 3" STORZ | Φ75.5 | |
| 2.5" STORZ | Φ63.5 | |
| 2" STORZ | Φ51 | |
| 1 3/4" STORZ | Φ44.5 | |
| 1" STORZ | Φ38 |
Photoes
